General Details
The Model KCW6023 (nominal 5-ton or 60,000 BTU) is the smallest water-cooled unit possible in size and capacity in The Ceiling Master Series, KwiKool’s Permanent Line of Above-Ceiling Mounted units. With its no frills features, high sensible cooling, and extremely small size, the KCW6023 is the perfect solution for cooling small server and IDF rooms, especially when floor space is limited. The Ceiling Master Series, KCW water-cooled models, perform and out last the competition with its small size, high efficiency, and lower cost.

The built-in mounting supports on the unit’s base allow for easy installation by a qualified mechanical contractor above a drop ceiling, using standard, off-the-shelf hardware. All Ceiling Master Series KCW water-cooled above-ceiling mounted units require access to a circulating water system, such as a chilled water system. Using tap water for water-cooled models is not recommended. The KCW models are equipped with a self-regulating internal water regulating valve, which is rated up to 150 psi. KwiKool’s self-contained design also eliminates the need for refrigerant connections, further reducing installation costs. All Ceiling Master Series KCW units come with two mounted flanges, which allow duct connection for the cold air supply and return. The KCW6023 runs on a standard 230-volt/30-amp three phase circuit and uses any 20-volt thermostat. The unit also comes with an internal high lift condensate pump.

And, KwiKool products are proudly MADE IN AMERICA.

made-in-usa-badge

Cooling Capacity (BTUH)
60,000 BTU (5-Ton)
Power Supply
230V / 30 Amp Circuit
Dimensions (WxDxH)
24 x 35.5 x 25
Specifications
COOLING CAPACITY
BTU/hr @ 95F at 60% RH60,000 (5-Ton)
COMPRESSOR DATA
Compressor TypeHermetic Recip.
Operating Temperatures60-95 F 50%RH
Refrigerant407C
FAN DATA
Evaporator
Fan Type (Centrifugal)Direct Drive
Air Flow (CFM)2000
Cold Air Supply14" Collar
Cold Air Return20" Collar
WATER FLOW DATA
Flow DeviceAutomatic Pressure Regulating Valve
Inlet Water 85F-95F Exit (GPM)15
Inlet Water 75F-95F Exit (GPM)7.5
Inlet Water 65F-95F Exit (GPM)5
Inlet Water 55F-95F Exit (GPM)3.75
ELECTRICAL DATA
Power Supply (Volts) 208/230 Three Phase
Current Consumption (Amps) 20.3/18.5
Power Consumption (kW) 6.7
Maximum Circuit Breaker (Amps) 30
Recommended Breaker Size30
Minimum Circuit Ampacity(Amps) 25.725
Min./Max. Voltage 195-225/210-250
DIMENSIONAL DATA
Width x Depth x Height (Inches) 24" x 35.5" x 25"
Weight (Lbs.) 380
Shipping Weight (Lbs.) 435
SAFETY DEVICE DATA
Compressor Overload Internal
Fan Motor Overload Automatic Internal
Evaporator Freeze Protection Hot Gas Bypass
High Pressure Switch Manual
Low Pressure Switch Automatic
Compressor Short Cycle Yes
Automatic Restart Yes
Thermostat Type Customer supplied
Condensate Pump Overflow Yes
Condensate Pump TypeInternal High lift 20' of head
Fire Alarm Control Safety ShutoffYes
Alarm Output for Building AutomationYes
Detail Drawings
KCW6023DD
Features
  • MADE IN USA
  • 60,000 BTU/H – 5-ton capacity air cooled
  • Compact yet Powerful
  • Runs on 230V 30 amp circuit
  • High Sensible Cooling – Ideal for Server Room Applications
  • All Direct Drive Blowers for Maintenance Free Use
  • THD Technology – Twin Direct Hyper Drives (Some Models)
  • High Static Cold Air Blower for up to 4 ducts for Cold Air Distribution to Hot Spots
  • Works with Almost All Thermostats
  • Signal Output Connects to Building Control System
  • Works with fire alarm Control for Safety Shut Off
  • Internal High Pressure 20-ft. Lift Condensate Pump with Overflow Cutoff
  • Automatic Low Pressure Switch
  • Manual High Pressure Switch
  • Hot Gas Bypass for Freeze Protection
  • Easy Access Service Ports
  • Compressor Short Cycle Protection
  • Automatic Fan Overload Protection
  • Non-CFC Refrigerants
  • Available in Air-Cooled & Water-Cooled Models