KPHP1811

LIST PRICE $4,995.00

17,010 BTU (1.5-Ton) Heating & 13,850 BTU (1.1-Ton) Cooling

General Details
The Model KPHP1811 (17,010 or nominal 1.5-ton Heating and 13,850 or nominal 1.1-ton BTU cooling capacities) is the smallest unit possible in size and capacity in The PHP Portable Heatpump Series, KwiKool’s combined heating and air conditioning models. With its full-featured design, high sensible cooling and balanced air system, the KPHP1811 is the perfect solution for comfort cooling and heating applications. The PHP Series is quick and easy with its “plug and play” technology and tops the competition in its small size, big performance and tons of features. From its hi-tech microprocessor controls and self-diagnostics, to the long list of standard features the PHP Series out performs other portables and all at a price that is comparable to other available products. Unlike other heat pump brands, the KwiKool heat pump will operate all the way down to 45 degrees F.

All PHP Series units come standard with our exclusive I/O Integral Condenser Dual Ducting, which provides isolated and balanced air pressure within the space for maximum cooling efficiency. The KPHP1811 runs on a standard 115-volt/15-amp circuit with automatic restart after a power failure. The unit comes with an internal high lift condensate pump and a 5-gallon exterior condensate tank with float activated unit cut off for short term use.

 

And, KwiKool products are proudly MADE IN AMERICA.

made-in-usa-badge

Cooling Capacity (BTUH)
17,010 BTU (1.5-Ton) Heating & 13,850 BTU (1.1-Ton) Cooling
Power Supply
115V / 15 Amp Circuit
Dimensions (WxDxH)
16.325x 36×37.25
Specifications
COOLING AND HEATING CAPACITY
HEATINGBTU/hr @ 55F at 60% RH17,010 (Nominal 1.5-Ton)
COOLINGBTU/hr @ 95F at 60% RH13,850 (Nominal 1.1-Ton)
COMPRESSOR DATA
Compressor TypeHermetic Rotary
Operating Cooling Temperatures60-110 F 50%RH
Operating Heating Temperatures40-80 F 50% RH
Refrigerant410A
FAN DATA
Evaporator
Fan Type (Centrifugal)Direct Drive
Air Flow (CFM)460
Supply Air DeviceAdjustable Vent
Supply Air Chute Kit (optional)2 - 5" Dia. x 12" Length
Condenser
I/O Integral Condenser Balanced Air Flow
Fan Type (Centrifugal)Direct Drive
Air Flow (CFM)700
Condenser Duct Specs (optional)2 - 12" Dia. x 8' Length
Condenser Duct Max. Length 25'
ELECTRICAL DATA
Power Supply (Volts) 115/Single Phase
Current Consumption (Amps) 11.5 Cooling / 14.7 Heating
Power Consumption (kW) 1.35
Maximum Circuit Breaker (Amps) 20
Recommended Breaker Size15
Minimum Circuit Ampacity(Amps) 18.075
Min./Max. Voltage 105-125
Power Cord Gauge/Length 14/6'
Plug Configuration NEMA 5-20
DIMENSIONAL DATA
Width x Depth x Height (Inches) 16.325" x 36" x 37.25"
Weight (Lbs.) 221
Shipping Weight (Lbs.) 271
Ceiling Kit Weight (Lbs.) 38
Shipping Weight w/ Ceiling Kit 309
SAFETY DEVICE DATA
Compressor Overload Internal
Fan Motor Overload Automatic Internal
Evaporator Freeze Protection Hot Gas Bypass
High Pressure Switch Manual
Low Pressure Switch Automatic
Compressor Short Cycle Yes
Automatic Restart Yes
Thermostat Type Microprocessor/Digital
Condensate Pump Overflow Yes
Condensate Tank Overflow Yes
Detail Drawings
kphp1811dd
Features
  • MADE IN USA
  • 13,850 BTU/H – 1.1-ton capacity Cooling
  • 17,010 BTU/H – 1.5-ton capacity Heating
  • Compact yet Powerful
  • Runs on 115V 15 amp circuit
  • Operates down to a 45 degree F. ambient environment
  • Balanced air pressure using separate condenser air input & output
  • Superior safety compared to electric heaters
  • Standard high pressure condensate pump
  • Easy-touch control pads make changing system settings a snap.
  • Independent evaporator and condenser motors
  • Auto restart in the event of power failure
  • Heavy-duty locking casters.
  • Fully insulated, heavy duty galvanized steel cabinet with KwiKool’s exclusive E-Z Clean™ scratch-resistant attractive two-tone HammerCoat™ epoxy protective finish for optimum durability, efficiency, low maintenance and quiet operation.
  • Easy access Service Door