Features that Matter

Iceberg Series

Iceberg-Logo

  • 14,000-120,000 BTU/H (1-10 ton) capacities
  • Compact yet Powerful
  • Up to 2-ton in 115V
  • A wide Operating range of 60ºF-110ºF
  • ETL and CETL listed to UL and CSA standards
  • Air-cooled and water-cooled models
  • Air-cooled models have the exclusive I/O Integral Condenser where both inlet and outlets are ductable, without costly and bulky add-on kits
  • Water-cooled models are equipped with a coaxial counterflow condenser combined with an automatic water control regulating valve.
  • Multi-function microprocessor control with a large, easy-to-read LCD display
  • Easy-touch control pads make changing system settings a snap.
  • Self Diagnostics that include an audible alarm and LCD visual display readout for system fault conditions
  • Input/Output Alarm Contacts for connection to building systems
  • Internal high lift condensate pumps and a 5- gallon reservoir tank for total condensate flexibility.
  • Condensate overflow protection.
  • Three fan speeds (most models)
  • Auto speed- automatically sets fan speed based on heat load demand (not available on single-speed models)
  • Thermostatic Expansion Valve
  • Heavy-duty compressors with automatic restart and short cycle protection.
  • Motors and compressors have overload protection.
  • High-pressure safety with manual reset.
  • Low-pressure safety with automatic reset.
  • Automatic freeze protection using hot gas bypass and fan cycling.
  • Low ambient controls. Ultra-low on KIB120xx and as an option on other models.
  • Heavy-duty locking casters.
  • Rifle tube coils for efficient heat transfer.
  • Fully insulated, heavy-duty galvanized steel cabinet with Kwikool’s exclusive E-Z Clean™ scratch-resistant attractive two-tone HammerCoat™ epoxy protective finish for optimum durability, efficiency, low maintenance, and quiet operation.
  • Sight glass with a moisture indicator.
  • Filter dryer for Moisture protection
  • Easy access Service Door
  • Shraeder service ports.
KPACII Series

  • Capacities from 14K btus to 24K btus
  • Smallest footprint in its class
  • Single duct for easy installation
  • Compact yet Powerful
  • ETL and CETL listed to UL and CSA standards
  • Multi-function microprocessor control with a large, easy-to-read LCD display
  • Easy-touch control pads make changing system settings a snap.
  • Fault Alarm audible alarm and LCD visual display readout.
  • Condensate overflow protection.
  • Heavy-duty compressors with automatic restart and short cycle protection.
  • High-pressure safety with manual reset.
  • Heavy-duty locking casters.
  • Fully insulated, heavy-duty galvanized steel cabinet with Kwikool’s exclusive E-Z Clean™ scratch-resistant attractive two-tone HammerCoat™ epoxy protective finish for optimum durability, efficiency, low maintenance, and quiet operation.
  • Rifle tube coils for efficient heat transfer.
  • Filter dryer for Moisture protection
  • Shraeder service ports.
KPO Series

  • 60,000 and 144,000 btuh capacities
  • Compact yet Super Powerful
  • HD 16 Gauge insulated G90 galvanized and epoxy powder coated cabinet mounted to a 12 GA Skid for optimum durability, efficiency, low maintenance and quiet operation.
  • HD Swivel and Locking Casters
  • Narrow compact size allows the KPO to go through a standard doorway.
  • Twin High Static Hyperdrive evaporator fans capable of running 100 feet of duct.
  • A wide Operating range of 60ºF-110ºF
  • Low ambient condensing temperature controls utilizing Variable frequency drive technologies.
  • Phase and power monitor provides protection from electrical irregularities and power quality issues
  • ETL and CETL listed to UL and CSA standards
  • Multi-function microprocessor control with a large, easy-to-read LCD display
  • Internal high lift condensate pumps for total condensate flexibility.
  • Condensate overflow protection.
  • Thermostatic Expansion Valve
  • Heavy-duty compressor with automatic restart and short cycle protection.
  • Motors and compressors have overload protection.
  • High-pressure safety with manual reset.
  • Low-pressure safety with automatic reset.
  • Automatic freeze protection using the hot gas bypass and fan cycling.
  • Rifle tube coils for efficient heat transfer.
  • Sight glass with a moisture indicator.
  • Filter dryer for Moisture protection
  • Easy access Service Doors
  • Shraeder service ports.
  • Internal Power Breaker (KPO12) only
  • Camlock Power Connections (KPO12 only)

 

PHP Heat Pump

  • 14,000-24,000 BTU/H  capacities
  • Compact yet Powerful
  • Higher heat rating than cooling.
  • ETL and CETL listed to UL and CSA standards
  • Exclusive Automatic Heat Retainer allows use in ambients as low as 40 degrees F
  • Has exclusive I/O Integral Condenser where both inlet and outlets are ductable, without costly and bulky add-on kits
  • Multi-function microprocessor control with a large, easy-to-read LCD display
  • Easy-touch control pads make changing system settings a snap.
  • Self Diagnostics that include audible alarm and LCD visual display readout for system fault conditions
  • Input/Output Alarm Contacts for connection to building systems
  • Internal high lift condensate pumps and a 5- gallon reservoir tank for total condensate flexibility.
  • Condensate overflow protection.
  • Dual Thermostatic Expansion Valves
  • Heavy-duty compressor with automatic restart and short cycle protection.
  • Motors and compressors have overload protection.
  • High-pressure safety with manual reset.
  • Low-pressure safety with automatic reset.
  • Automatic freeze protection using hot gas bypass and fan cycling.
  • Low ambient controls.
  • Heavy-duty locking casters.
  • Rifle tube coils for efficient heat transfer.
  • Fully insulated, heavy-duty galvanized steel cabinet with Kwikool’s exclusive E-Z Clean™ scratch-resistant attractive two-tone HammerCoat™ epoxy protective finish for optimum durability, efficiency, low maintenance, and quiet operation.
  • Sight glass with a moisture indicator.
  • Filter dryer for Moisture protection
  • Easy access Service Door
  • Shraeder service ports.
AtticMaster

  • 13,700 BTU/H – 1.15 Ton capacity air-cooled
  • Compact yet Powerful
  • Runs on 115V 15 amp circuit
  • A wide Operating range of 60ºF-110ºF
  • ETL and CETL listed to UL and CSA standards
  • Includes Kwikool’s Exclusive I/O Integral Condenser where both inlet and outlets are ductable, without costly and bulky add-on kits
  • Multi-function microprocessor control with a large, easy-to-read LCD display
  • Easy-touch control pads make changing system settings a snap.
  • Self Diagnostics that include an audible alarm and LCD visual display readout for system fault conditions
  • Input/Output Alarm Contacts for connection to building systems
  • Internal high lift condensate pumps and a 5- gallon reservoir tank for total condensate flexibility.
  • Condensate overflow protection
  • Three fan speeds
  • Auto speed- automatically sets fan speed based on heat load demand (not available on single-speed models)
  • Thermostatic Expansion Valve
  • Heavy-duty compressor with automatic restart and short cycle protection.
  • Motors and compressors have overload protection.
  • High-pressure safety with manual reset.
  • Low-pressure safety with automatic reset.
  • Automatic freeze protection using the hot gas bypass and fan cycling.
  • Low ambient controls
  • Heavy-duty locking casters.
  • Rifle tube coils for efficient heat transfer.
  • Fully insulated, heavy-duty galvanized steel cabinet with Kwikool’s exclusive E-Z Clean™ scratch-resistant attractive two-tone HammerCoat™ epoxy protective finish for optimum durability, efficiency, low maintenance, and quiet operation.
  • Sight glass with a moisture indicator.
  • Filter dryer for Moisture protection
  • Easy access Service Door
  • Shraeder service ports.
BioKool

  • H (1-10 ton) capacities
  • 13,800 (1-Ton) BTU/hr @ 95F at 60% RH
  • A wide Operating range of 60ºF-110ºF
  • ETL and CETL listed to UL and CSA standards
  • Air-cooled and water-cooled models
  • Air-cooled models have the exclusive I/O Integral Condenser where both inlet and outlets are ductable, without costly and bulky add-on kits
  • Water-cooled models are equipped with a coaxial counterflow condenser combined with an automatic water control regulating valve
  • Multi-function microprocessor control with a large, easy-to-read LCD display
  • Easy-touch control pads make changing system settings a snap
  • HEPA air filter removes 99.99% of particles greater than or equal to 0.3 µm diameter.
  • Self Diagnostics that include an audible alarm and LCD visual display readout for system fault conditions
  • Input/Output Alarm Contacts for connection to building systems
  • 304 Stainless Cabinet
  • Ultraviolet Irradiation built into the cabinet
  • Biokool’s unique air therapy system cools, cleans, disinfects and retards mold and microbe growth while preventing cross contamination.
  • Internal high lift condensate pumps and a 5- gallon reservoir tank for total condensate flexibility
  • Condensate overflow protection
  • Non Porous Insulation in Isolated Air Streams
  • Three fan speeds (most models)
  • Auto speed- automatically sets fan speed based on heat load demand (not available on single-speed models)
  • Thermostatic Expansion Valve
  • Heavy-duty compressors with automatic restart and short cycle protection
  • Motors and compressors have overload protection
  • High-pressure safety with manual reset
  • Low-pressure safety with automatic reset
  • Automatic freeze protection using hot gas bypass and fan cycling
  • Low ambient controls. Ultra-low on KIB120xx and as an option on other models
  • Heavy-duty locking casters
  • Rifle tube coils for efficient heat transfer
  • Fully insulated, heavy-duty galvanized steel cabinet with
  • low maintenance, and quiet operation
  • Sight glass with a moisture indicator
  • Filter dryer for Moisture protection
  • Easy access Service Door
  • Shraeder service ports.
BIOAIR